Dollhouse Building Supplies Aztec | Dollhouse Junction Splice

This Junction Splice Serves As The Juncture Point For Connecting The Lead-In Wire To A Tape Run. The Embedded Nails Hold The Connector In Place And Also Establish Electrical Contact Between The Tapewire And The Male Pins On The Lead-In Wire Plug. It Is Simply Placed Over The Tape Run And Pounded In.

Two Sets Of Protruding Teeth On The Bottom Also Provide Additional Paths For Current Flow Into The Copper Foils. The Threaded Screw Aids In Locking The Junction Splice In Place And Prevents Accidental Dislodgement During Use. This Junction Splice Is Compatible With Transformer Lead-In Wire With Fuseholder &Amp; Switch.